Author Topic: firmware downgrade  (Read 1659 times)

Paardenkooper

  • Newbie
  • *
  • Posts: 7
firmware downgrade
« on: January 22, 2016, 10:52:04 PM »
hi @ all,

does anyone know how to downgrade the ZEUS??

I have one of the first ZEUS printers and after the firmware update I got loads of errors.

also the heat sensor doesn't work anymore


many thx in advance,

Camille

syer1

  • Jr. Member
  • **
  • Posts: 53
Re: firmware downgrade
« Reply #1 on: January 22, 2016, 11:02:21 PM »
what firmware are you currently on?
Also what errors are you getting?
Maybe you wont have to downgrade.

Paardenkooper

  • Newbie
  • *
  • Posts: 7
Re: firmware downgrade
« Reply #2 on: January 23, 2016, 02:41:39 PM »
The firmware the ZEUS is running is the latest .

We have the logout message popping up. we were not able to upgrade the printer ,so we reimaged the sd card with an exact copy of the other ZEUS printer.
since that moment the heater sensor readout stopt in the software, but al hardware is functioning perfectly, we measured the nozzle, it was a perfect 197 degrees.

so simple we need to reimage the sd card with old firmware.

The logout screen is popping up deu to a controller board failure.

does anyone has an old image, that would be a great help.

Thx in advance,

Camille

syer1

  • Jr. Member
  • **
  • Posts: 53
Re: firmware downgrade
« Reply #3 on: January 26, 2016, 12:27:46 AM »
The firmware the ZEUS is running is the latest .

We have the logout message popping up. we were not able to upgrade the printer ,so we reimaged the sd card with an exact copy of the other ZEUS printer.
since that moment the heater sensor readout stopt in the software, but al hardware is functioning perfectly, we measured the nozzle, it was a perfect 197 degrees.

so simple we need to reimage the sd card with old firmware.

The logout screen is popping up deu to a controller board failure.

does anyone has an old image, that would be a great help.

Thx in advance,

Camille


https://drive.google.com/file/d/0B6Pcswt0nYSmdEJVelZNdkFzS1U/view


let me know if you need the instructions on how to flash