Author Topic: UI Not Loading  (Read 134 times)

MANOSTL

  • Newbie
  • *
  • Posts: 1
UI Not Loading
« on: April 09, 2020, 05:26:57 PM »
I ran a couple updates the other night and then printed off several jobs then shut it down at the end of the night.

Now when I turn the Zeus on it loads up into the screen where you see the 4 icons in the top left hand corner and the small AIO Robotics wallpaper in the center. I notice the power button is also pulsating green

The only update i can seem to find is one that was released recently and is a .bin file which i'm assuming i need to remove the internal flash drive for...? I'm not seeing anything in here that is very helpful neither...

Has anyone had experience with this?

MadisonCH

  • Newbie
  • *
  • Posts: 8
Re: UI Not Loading
« Reply #1 on: April 12, 2020, 04:49:09 AM »
Hi Mano,

you have a boot fail?
You can install a new Micro SD with this bin file. 

See instructions here: http://www.aiorobotics.com/manual/doku.php?id=boot_fail

Greeting Madi
« Last Edit: April 12, 2020, 04:54:07 AM by MadisonCH »